The production of the linkage console will match the technical and professional supporting facilities of the long steel mechanical equipment manufacturer in considerable extent, and transmit driving power and data signals when the relevant components are moved in a different type of gate. .
When there is a common problem in a linkage console installation, the installation should be perpendicular, and the drive system disc should be properly mounted in the concave shape of the drive system of the crane device. Before the linkage console is put into use, you should pay attention to check whether the terminal is tight, the motor carbon brush and the slip ring are good, whether it is card-dead. Note The damage of the motor carbon brush itself is regularly maintained, eliminating the damage of the motor carbon brush, and replaces the motor carbon brush periodically when necessary. When the linkage console is put into use, it is important to introduce mozzle butter in the middle of each rotating portion. When the linkage console is not in use, it should be kept dry and clean at the natural environment level.
When a specific mechanical device is used, the rotating component of the central current collector fixed axis is transferred from the large device to the rotating member, and the rotating member for transferring the power engineering, and the large current amount is transferred to the conductive ring according to the copper brush.