Of Silicon to the Stel Reduces the Eddy Current Losses and Electrical Conductivity, Improving the Ability of Magnetic FieldRate It and Reduking the Stel’s Hsote
a delay.
Time When a Magnetic Field is FIRST Generated or Applied to the Steel and When the Field Fully Develops.
the stator of a 1/2-hp motor contains about 250 to 300 laminations.
The Presence of Silicon in the Steel has a Negative Effect on the Wear of the TOOL THAT is using to stamp it, so take special care when designing a die
Stock in Both Directions -Traveling to DEAD BOTTOM and Again When Retracting Upward in the Press Stroke.
Use minimum painting of the punch to resic wear, and use ejector pins to prevent the slum backing up.
High-Polish All Punches that Will Blank the Laminations to Reduce FricTion Between the Punches and Material.
A variety of tool Steels and Carbides are used to stamp lamination Steel, depending on the product volume: High-carbon Steel (high-2), HIGH-SPEED STEEL260).
Die Life.