What kind of copper wire soft connection is used for general copper foil soft connection explosion-proof switches
12
In our daily life, what kind of copper wire soft connection will be used on general explosion-proof switches??With this question, let’s take a look at the following content!Copper wire flexible connection is divided into copper braided wire flexible connection and copper stranded wire flexible connection, which are distinguished due to different copper wire braiding methods.Copper braided wire soft connection because of the accurate installation position and small cross-section, so bare copper braided soft connection is basically used.The soft connection of copper stranded wire is chosen because there are many places and the space is relatively narrow..Originally, cables were used to make connecting wires. During installation and use, because the cable jacket was too hard to bend, it was gradually changed to copper stranded wire to customize the copper wire soft connection, and the insulating layer would be covered with a relatively soft silicone tube..Some use copper stranded wire soft connection to connect, the shortest one is usually made of thinner and softer copper stranded wire, and the insulation layer will also be made of silicone tube..Other series of explosion-proof switches will also adopt the corresponding copper wire soft connection according to the actual installation situation.Zhejiang Renhe Electronics Co., Ltd. is a professional copper bar manufacturer in Zhejiang, focusing on the production, research and development and Sales.Products comply with EU environmental protection, UL flame retardant, ISO9001 management system certification requirements.