When the package is aborted, the ordinary demand has set up the tension value of the film early, and then the surrounds are surrounded by this membrane tension value. There is a knob above the ordinary surround machine, which is used to regulate the friction of the film rubber roller on the package mechanical film, and adjust the membrane of the surround machine.
If there is a force, there is a tension conditioning knob on the control panel. The clockwise direction is adjusted, and the tension value is added. The larger the stretch of the film, the smaller it.
After adjusting the speed of the package mechanical output motor, the difference in regulation of the turntable speed is conditioned to condition the tension, and the tension-tensioned surrounding machine is to regulate the resistance of the tensile rubber roller to condition the tension, no tension conditioning button, the pre-stretching ring winder should cooperate The turntable speed is conditioned and the barrier tensile machine is not available.
Packaging mechanical adjusts the tension time of the membrane, which can be added to the stretching ratio of the film, which is conducive to cutting the capital. However, too large tension will incur the damage of the film, but it affects the packaging effect, the export or tray is pulled down, and the film break is better. The surround film is also called the stretching film, which is
A packaging material of the LLDPE substrate, and the packaging machinery can be used in combination with the surrounding machine.
A large convenient viscous tensile surround film is provided with a low density polyethylene, which is mainly used for large, small pallets or irregular products of large, small pallets or irregular products. Applying surround film to stop product packaging, you can use the money to use this money, using a surround film
There are about 15% of the box packages, about 35% of the heat shrinkable film, about 50% of the carton packages. A workmanship, progress packaging efficiency, and packaging level can be landed together.
The package object is basically in the middle of the packaging machine. First, the right top body rises, the front end of the compression belt, tighten the strap on the object, then the left top body rises, press the appropriate position of the lower strap, the heating sheet extends into the middle The top knife in the packaging machine rises, cut the belt, and finally put the next bundle
The belt is sent in place and complete a work cycle. The packaging machine is a machine that uses a packaging with a packaging of winding products or packages, then tightening and using both ends through the thermal effect, or using a buckle and other materials. The function of the packaging machine is to make the plastic can be close to the surface of the bundled accessories to ensure that the package is transported, stored.
Do not scatter because of bundling, but also should be neat and beautiful.
The stretch film has a high flexibility, not easy to break, strong anti-burst, strong anti-hunting performance, strong tear resistance, strong tension, alternative box packaging. Under the same weight, the theoretical packaging area of ??the packaging machinery ultra-thin surround film is about 3 times the traditional surround film in the market. Concerned surround film
For example, the capital is appropriate, and our green environmentally surround film is a high-intensity pre-stretch-free surround film, which is appropriate, saving money. It is not easy to stick to the outer surface of the packaging, clean and hygiene.