Each time the system is automatically detected when the system is automatically run in the default mode, confirm that all cylinders are in the reset state, if not in the reset state, the system will call, and all cylinders are reset, and when the system is automatically When the operation status is switched to the manual operation status or two states, all cylinders will be automatically reset (ie folds, pins, plastic, easy-zip, upload, challenge, cut, blown to the initial state) .
In order to make the air pressure in the normal state powder packaging machine, when the air pressure is insufficient, the system will have a prompt information, inform the user’s air pressure, the system will not start, the entire system provides two emergency switches, once in sudden accident, press the emergency stop Button, the system will stop all, all the operations are prohibited until the fault is released, and all the operations will be performed after the emergency stop button is restored.
If you want to make it more perfect, you can check the device, it is best to make it clean and tidically a month. The particle space is not allowed to flow in the atmosphere. It is found that it should be repaired when it is damaged. Do not make the transparent film packaging machine work again, and it is necessary to keep the whole machine clean and tidy.
The 诀窍 in the packaging machine is in use.
1. Perform a full maintenance of a surface every three months.
2. After the work is completed every day, it should be cleaned on the surface of the machine, and it is tight to prevent dust pollution.
3. Requires ensuring that the machine is stable and placed, ensuring that the equipment can operate safely, avoiding unwanted trouble.
4. Select the skilled operator for operation to use to prevent unnecessary damage.
5. To perform a regular overhaul, check the various unnecessary hidden dangers.
6. During use, it is strictly forbidden to directly prevent the machine from high temperature of the machine, so as not to hurt your hand.
7. After the machine is used, clean up the things that you do not need to clean up, and prepare for the next large bag packaging machine.
The packaging film is cut into the length of the package, and the small packaging box is transported by the conveyor, and the cylinder is pushed (the form and quantity as required), the wrap film and the folding encapsulation form a medium package, because the equipment is not The heat sealing oven of the heat shrink packaging machine will be heated as a whole, and the local point is used to low-temperature packet, which does not cause temperature variations in the cassette, which is referred to as a cold chaler, and can replace the heat shrink packaging machine.
Compared to heat shrink packaging machine to pack scale energy saving power saving, full seal packaging: waterproof moisture, anti-infection.
◆ Instantly, the heat sealing station does not appear: approximately cold packaging, no effect on the drug, and thermal products.
◆ Fully automatic: automatic upper, stack, packaging, heat sealing, finishing, counting.
◆ The electrical control system is centered on the programmable controller PLC to ensure that the equipment is stable and reliable, and the performance is stable.
◆ Automatically zero zero, reset functionality, equipment is humanized and intelligent, used, operate, maintenance, and easier.
Shanghai Bofi Packaging Machinery Co., Ltd. is a high-tech technology enterprise integrating R & D, production, sales and services. The products are: particle packaging machine, powder packaging machine, weighing packaging machine, sack packaging machine, packaging scale, widely used Pesticide, feed, chemical and other industries, the company has become Shanghai professional powder packaging machine manufacturers, particle packaging machine manufacturers, telephone: 400-6181577HTTP: //www.bohui666.com/.