too Thin, Poor Guide Pin Selection, Poorly Fitting Dowels. The list goes on and on.

　　First, We’l Address How to Choose the Best Die Set.

　　LOWER PLATES Must Interface with Proper, Precise Cleaarences.

　　Custom Shapes Specific to Each Part. Features Such as a Means for Handling the Die Also Can be incorporald into the case.

　　Disintegrating it. After the cost Iron has solidified, the Hardened Sand Mixture Is Removed, Leaving A Cast Replica of the STYROFOAM MODEL.

　　is the most poster, a milled Surface Can be obtained that is as an obcurate as a grounding summer.

　　Steel Die Sets can be plugged and welded fairly easily.

　　Include QC-7, QC-10, and Fortal.

　　Limited Die-Handling Capability, its light weight is a benefit.

　　Aluminum Die Sets are more extensive than Steel Die Sets, however, and they are more different to plug and repair if a scream.

　　UnforTunately, TheRe IS No Quick and Easy Formula for Determing The Ideal Die Set Thickness Be Many Factors Must Be Considered.