The safe operation rules of copper row machine
twenty one
The copper bar machine adopts horizontal processing, which is safer and more convenient during processing.The operation of the copper row machine should also be paid attention to. The use rules of the copper row machine must be strictly followed before, during and after the operation. The following copper row manufacturers will give you a detailed introduction before the operation of the copper row machine: 1. Turn on for the first time The fuel tank must be filled with oil first to avoid damage to the oil pump. 2. You must read this manual carefully and be familiar with the structure, performance and operation methods of the machine. 3. Do not bring a scarf or wear a coat or other clothes to operate. 4. Use the correct method to work in order to stop and get rid of the danger as soon as possible in the event of a failure. 5. If the ambient temperature is lower than 0℃, you should start the machine and run it for a few minutes before working. During the operation of the copper bar machine: 1. Assembling, debugging (moulding, adjusting the blade gap) or disassembling the mould must be carried out by personnel familiar with the machine in accordance with the prescribed procedures. 2. When the machine is working normally, do not put your hands or part of the body between the upper and lower molds (blade) to avoid accidents. 3. Do not put all sundries and tools on the workbench to avoid accidents caused by rolling into the mold or knife edge. 4. Since the machine can be operated by multiple people, there must be someone responsible for directing production. 5. Be sure to choose the gap between the shear blade and the die and the bending radius according to the thickness of the copper bar (or aluminum bar). 6. Be sure to stop the machine when changing the mold to avoid danger. 7. During operation, be careful when holding the workpiece and waiting for the slider to go down. 8. The sharpness of the cutting edge of the blade and die should be checked regularly. If the cutting edge is found to be dull, it should be sharpened or replaced in time. 9. Keep the oil clean and the oil path unblocked, and lubricate the moving parts of each unit every shift. 10. The electrical and hydraulic components must be flexible in action and in the correct position. If abnormalities are found, they must be stopped immediately for inspection. After the operation of the copper row machine: After the operation, be sure to shut down safely in the following order: 1. Turn off the working buttons of each unit. 2. Turn off the power switch on the operation panel. 3. Turn off the main circuit air switch. 4. Turn off the power switch of the workshop. Yueqing Renhe Electronics Co., Ltd. is a professional copper bar manufacturer in Zhejiang, focusing on the production, research and development of new energy electric vehicle battery copper bar connection, electrical connection copper bar, braided copper bar, flexible copper bar connection, cable connection and insulating protective cover And sales.Products comply with EU environmental protection, UL flame retardant, ISO9001 management system certification requirements.