· Multi-person is authorized to implement the same task, each staff must perform their own lock listing procedures, rather than hoping to others.
· Never authorize others to remove your laisto.
· Only operate the device that has completed the laisto security device.
· When you have a handover, you must not unauthorized eliminate the original lock listing device, and you must wait until the next successor is allowed to feed the above to release the original lock list. At the same time, the new successor must re-confirm whether the lock list is safe and reliable, and the confirmation can be operated.
· Never pinned your safety on someone else’s lock, always remember to protect your own security.
· Using the correct lock, for example: To lock 3 inch pipe gate, you have an existing one 5-inch to 6.5-inch gate safety lock, please do not figure out the lock of the province and do not match the lock, should go immediately Correct size lock.
· Make sure your laistrade can resist its environment, such as lake, corrosion, etc., otherwise you will lose your effect.
· The lock and listing need to be used in conjunction, and cannot be replaced with each other.
· From January 2, 1990, whenever the machine is replaced, large repair, transformation or innovation, or when new machine equipment is installed, the energy achever device for the machine should be designed. The upper lock device can be employed.
· Operators should test the ability to control the capacity control regulations at least once a year to ensure that the procedures and requirements of this standard shall be implemented, and the regular inspection should be performed by authorized employees, rather than the personnel who perform energy control procedures.
? If there is a possibility that the storage energy is re-accumulated to the dangerous level, the isolation state should be verified, until the maintenance or maintenance is completed, or this possibility no longer exists.
? When an external maintenance personnel participate in the maintenance activities within this context, the on-site operators and external operators should inform each other or listing procedures.