What should I pay attention to when the temperature controller is installed
Precautions for the installation of temperature control switch:
1. The lead bending depends on the part of the part from 6 mm from the root of the root; when bending, it shall not damage the root and Tamper-proof Thermostat lead, and shall not be forcibly pulled, pressed, and twist the lead.
2. When the temperature coordinating switch adopts the fixing method of screws, rivets, or wiring columns, it should be able to prevent mechanical creep and the production of adverse phenomena.
3. The connection parts should be large in the field of electrical workplace operations, and will not displacement due to oscillation and attack.
4. During the leading operation of the lead welding, the heating humidity limit should be minimized, and you must not add high temperatures on the hot -melt broken body; you must not force it, press, twist the hot melting broken body and the lead; Essence
5. The temperature tube switch can only be used under the condition of the rated voltage, current, and the specified temperature of the rules. It is necessary to pay attention to the temperature that the thermal melting body can suffer to the maximum continuously. Remarks: The length and temperature of the nominal current, the lead and the temperature can be planned according to the customer’s request.