Scrap Processing System Can Go a Long Way Toward Reducing Physical Labor Requirements and Automating Many of the Strenuous Tasks Undertaken in TODAY’STAMPING Shops.

　　Reduce Touch POINTS, DeCRease Total Scrap Volume, and Increase Scrap Value.

　　There are a few key ites to keep in mind when instaling a conveyor system for stamping application:

　　handle.

　　Determine the overals scrap handling strategy is base on a Machine-By-Machine Strategy or if a Central System that Will Handle Machnes is Preferred.

　　Guards Should Be Removed only to Complete Maintenance. They Should AlwayS Be Rottached After Maintenance is Complete and BeFore ResUpeyor Operation.

　　Be added to Reduce the channels of injury, such as cover plates and guards, butre safety training is imageant.

　　Here Are a Few tips and general guidelits to help you make sure your scrap handling or conveyor system runs smoolhly and effectly:

　　Incorporate Cleanout Features Into the System ’s Design. These Cleanouts can resece the maintenance time needed to keep the system running smoothly.

　　Make Sure the Belt is Properly Tensioned. The Conveyor Will Run More Accurately and Efficiently with A Properly Tensioned Belt, Reducing The CHANCE of Jams and Eliminating Pares.

　　truck load.

　　Parts UnRcognized Profit. In Addition, BRIQUETTES Are More Easily Stored Than UNPROCESED Or Shredded Scrap.