Precautions for temperature controller temperature switch

Precautions for temperature controller
控 grounding method: The metal cover of the temperature controller is connected to the ground metal parts of the device.
式 When installing a temperature -induced installation, the metal cover should be tightly installed by the controlling appliance. In order Electric Filter Fan Cabinet Heater Fan Heater with Thermostat  to ensure the temperature sensing effect, the thermal conductivity should be applied on the temperature surface of the temperature or other performance.
(3) Do not crush, loosen or deform the top of the cover surface during installation, so as not to affect performance.

The liquid cannot be penetrated into the inside of the thermostat.
A Products are used in circuits with no more than 5A current, and the copper core section should be connected to 0.5-1㎜2 wires; in circuits that are not greater than 10A, the copper core section should be 0.75-1.5㎜2 wire connection connection should be selectedEssence
湿 Products should be stored in warehouses of ventilation, clean, dry, and corrosive gases of ventilation, clean, dry, and corrosive gases below the relative humidity.
折 The use process cannot bend the wiring terminal, otherwise it will affect the reliability of electrical connection