Source: Views: Load … Release … Release: 2019.08.28
We design, how to electrical cabinets is a problem, then the problem, so the control cabinet is wiring wiring, sometimes, sometimes
One: About electrical appliances ::
1. Small circuit breaker and side wiring inverted.
2. The voltage of the electrical coil drawing does not match the voltage, especially in line with the Semi-automatic packing machineelectrical appliances and instructions. Essence Essence Essence
3. Electric polarity is connected, and DC electrical element is positive and negative polarity positive and negative polarity positive negative polarity Positive negative polarity Positive negative polarity Positive and negative poles Polarity of positive and negative, such as: electrolytic and electrolytic, crystals, crystals, integrated tubes, once once. Essence Essence
Two: About terminal ::
1. Tightened by the end:
主要压紧，主要压紧压紧防止他们电阻过大大大大大大大大大大大大过过过过过过过的电流电流电流电流电流电流过过过时时时时。 This situation causes information to the signal line. Dynamic power circuit, the loop circuit circuit
Processing: The terminal is pressed appropriately. For example, if the power is powered, the circuit needs to be carried out.
2. Wire diameter and specifications ::
Although it is time, although I can’t feel it from time to time
Treatment: If or with the symbol, the wire must be returned from time to time to do
3: About terminal insertion ::
1. Insert the line into the pile and come through the lower part of the pile. The upper and upper stress is firmly on the circuit breaker, in fact, up and up and up.
2. The terminal and the parts are not available, adding, terminal strength, and terminal strength and force
3. Power wiring, color set or passing, so as
4. 4Automatic packing machine. During the access, the same section can access the above -above -higher wire wire wire wire wire wire wire wire above above above over the wire wire above over above the wire. In contact with the wires of the wires in the middle part, the connection is contacted.
Four: At the time of wiring ::
1. Deformation of bolt, do not tiger or loose nut nuts to prevent, prevent damage, use, use damage, adjust and adjust it with live mouth
2. The nuts discovered, do not act, prevent it, prevent difficulty, deal with disassembly, deal with it, or knock
3. Slip the screw knife, use screws or time, must be loose, the top of the screw knife must be tight and tight, then the screws, and then the screw screw
4. The bolt buckle, the tight wiring should be moderate to prevent excessive force. Essence Essence
Pillow type packing machine
Five: About ::
Copper dandruff falls to see the hidden dangers of major hidden dangers come out
Six: About electronic control installation:
1. Mistakes in the box. The electronic control box electronically controlled box is good. Its sealing is good. Essence
2. Fixed fixation of the bottom plate device or other disassembly methods
(() Electric tank, electrical cabinet, electrical cabinet, imitation phone: 18964621522