Three Things Need to be considerted when you are looking more closly at a die ’s about to feed:
take Five Minutes or Less.
and loaded.
Thick Material Into The Die is a Different Story. WhenVer Possible, Provideo a Sheld for the Material to Sit on So the Operator Doesn’t to Hold the Material Up While Feing Its
FIGURE 1 Shows a Die Design for Easy Strip-Starting.
Has very little edge casber, and the operator is well-trained.
Figure 2
have a tendender to Edge-Bnd Through the Die. It works in the Horizontal and Vertical Boundaries of the Carrier Rail to Ensure The Strip Can Be Fed Figure 3).
Many Different Types of Lifter Systems Can Be used for Progressive Die Applications.
And Bend Pitch Stop.
Strip Lifters is are used to lift the strip slice when the part requires very lift to feel it (See Figure 6). They Also support the strip during pilot entry.
Make Sure that the Carier is Wide Enough to Prevent Severecting During the Feeding Process.