Injection molding, The Material is heated to a molten point. The molten material is fed into an almedy-design mold that defines the shape of the item to be propuced.

　　The Plastic Material is Melted Firs Melted in the Heating Chamber and POURD Into A Mold, where it ’s left to cool it’ s food ejected from the mold and before

　　The Construction of the Plastic Injection Machine Consist

　　Clamping Unitcrossheadsejector Mechaanismnozzleinject UnitBarrelheaterhydraulic Uniteach of these PARTS Will Be Explored Paragraphs:

　　Clamping Unit: The Inject Machine Has A Claming Unit (Hydraulic Or Toggle Type). The Clamping Unit is installed to Pressure The Mold and Res ".

　　Ball Spline Nut in the Crosshead is Linked with the Spline Shaft so that the Ball Spline Shaft Controls the Crosshead.

　　Ejector Mechanism: After the Production Process, The Rod on the Inject Machine Will Pressst The Ejector Plator Push the Product Out of the Mold.

　　, Including Filtering, Mixing, and Shut-OFF of Melt Flow.

　　Temperature regulated for disfition plastic materials.

　　And Strip Heater.

　　Hydraulic motion injection molded parts cause any defermities.