Author: Kaili Machinery Source: Ruian Kaili Machinery Co., Ltd. Released on: 2021-7-3 19:52:41
Using packaging machinery to package products can increase productivity, reduce labor intensity, adapt to the needs of large-scale production, and meet the requirements of cleanliness and hygiene.But what are its standards, let’s understand it together:
1. The packaging machinery should fix the product label on the obvious part, and indicate the main technical parameters necessary for the normal operation of the machine or equipment, such as: rated current and voltage, rated pressure and thermal temperature, etc..
2. The safety requirements of the hydraulic drive system on the packaging machinery should meet the requirements of GB3766, and the safety requirements of the pneumatic system should meet the requirements of GB7932.
3. The safety requirements of packaging machinery and electrical equipment should comply with the relevant regulations of the GB5226 standard.
4. The dangerous parts on the packaging machinery that can cause personal hazards must take corresponding safety measures.Relatively moving parts, such as clamping and shearing, must ensure a safe distance between moving parts to prevent the operator from being pinched or cut.Dangerous transport devices should be placed in the body as much as possible.Protective measures must be taken for exposed rotating, moving or reciprocating parts that affect personal safety.The exposed positioning parts or protruding parts on the moving parts must be smooth or protected.
5. The parts that may loosen during mechanical operation must have reliable anti-loose measures.
6. When packaging machinery needs to discharge waste and smoke.Corresponding devices should be installed to avoid harm to operators.
7. The packaging machinery only requires that the motor rotates in one direction, and the steering mark must be made on the motor or at the appropriate position..
8. When personnel enter the work area in greater danger, safety protection devices should be installed in the work area.When the protective device isolates the entire working area of the packaging machine, the dangerous parts in the working area may not be provided with additional protective devices.The setting of protective devices in the work area should ensure a safe distance.
9. Packaging machinery that needs to be operated off the ground or set up should be equipped with a platform that meets the requirements of relevant standards, and corresponding devices such as ladders and protective railings leading to the platform..
10. The working mechanism of packaging machinery should have interlock protection to stop the machine or equipment from working when a failure occurs.
11. The packaging machinery should generally be equipped with a safety switch. In any emergency, press this switch to stop the machine to avoid accidents..
12. Before the machine or equipment enters the state of motion, it is necessary to remind all personnel to leave the dangerous area in time, and the packaging machinery should be equipped with a warning device.
13. There should be clear and eye-catching signs of operation, lubrication, safety or warning on the packaging machinery.Safety colors and safety signs should meet the requirements of GB2893 and GB2894, and the graphic symbols in the signs should meet relevant standards or regulations.
Keywords: packaging machinery and equipment
Note: The content of the article is compiled and reproduced by Ruian Kaili Machinery Co., Ltd. Please indicate
related articles