The particle packaging machine is mainly suitable for use in a quantitative packaging of granular materials such as food, rubber, fertilizer, metal, and chemical. If the particle packaging machine has problems, we need timely solve problems, but you know how the particle packaging machine does the problems, how do you need to exclude? If you don’t know the rule, or come to see the elimination of the particle packaging machine manufacturers.
The five troubleshooting methods of the particle packaging machine are as follows:
First, the mold is poor
This problem is often seen, first we need to find from a simple place, see the temperature of the temperature has reached the temperature of the packaging film, if you need to check the pressure of the mold, if there is no problem, because the mold The teeth do not bite or because the pressure is different.
Second, photoelectric problems
Solution The film is not sweeping to the film above the film, check whether there is dust on the light eye, check whether the photocolence sensitivity is adjusted, check whether the film is recorded by the eye recognition, if there is a need to find There is no change in color, if you can’t find it, your packaging film can throw garbage pile.
Third, the temperature can not control
There is basically two factors like this, one is because the temperature control form is destroyed, and there is a damage to the relay, first test the relay, because this problem is more damaged.
Fourth, the temperature can not rise
This problem is still very good, first of all, it is necessary to check whether the fuse is destroying and then checking whether the appliance is destroyed, and you can use the universal table to test. If you don’t have a menu, you can use the test pen, if There is no damage to the next step, it is necessary to see if the wire of the heating rod is loose.