Electronic temperature switches and thermal protector should pay attention to the following:
(1) When a contact sensing is used, the temperature switch should be tested to the mounting surface of the temperature product.
(2) The plastic or metal housing of the temperature switch is not extruded or tapped, so that it is deformed to avoid affecting properties.
Filter Fan Ventilation Filter Fan
(3) Metal shell products have an additional jacket that cannot be used in the installation of the insulating sleeve to remove or compromise, avoiding leakage, ensuring safety.
⑷ The product is used in a circuit that is not more than 5 A. The copper core section should be selected to be connected to it to ensure that the entire product can be used normally.
⑸ The product should be stored in a place where the relative humidity is less than 90%, ambient temperature 40 ° C, clean, dry, dry and non-corrosive gas.
If you have a temperature switch, temperature controller, temperature sensor, temperature transmitter, thermal resistance, thermocouple and other product selection quotes, please contact us
Tianjin Billy Technology Development Co., Ltd.
Address: 2, Building 2, Building 2, Huading No. 2, No. 2, Innovation, Xiqing District, Tianjin
Landline: 022-8639 3578 (9: 00-17: 00)
Mobile: 18902099138 (8: 00-24: 00)
Fax: 022-27984101
Mailbox: saler@tjbily.com