Cutting process of copper row processing machine
12
The shearing process is an important part of the copper row processing machine. At present, the cutting technology of the copper row processing machine is divided into dislocation shearing and punching shear..Below, let’s take a look together: 1.Misplaced shear. The shearing method used by most copper bar processing machines in the shearing process is dislocation shearing.In this way, the design of the mold is simple to manufacture, and the cutting method is concise, which is convenient for users to understand, operate and maintain.However, the copper bar cuts are often uneven, the smooth area of the cuts is small, and the cuts are inclined, which cannot meet the requirements of use.. 2.Punching. After investigation and analysis of relevant data, the punching and shearing method is more similar to punching than shearing, except that the shape of the punching is a very narrow rectangle, which is a kind of closed shearing..During punching and shearing, the cutting edges of the tool are in contact with the copper bar on both sides, and the forces on both sides are symmetrical, so the neatness and quality of the cuts of the processed copper bar are better than the former. Yueqing Renhe Electronics Co., Ltd. is a professional copper bar manufacturer in Zhejiang, focusing on the production, research and development of new energy electric vehicle battery copper bar connection, electrical connection copper bar, braided copper bar, flexible copper bar connection, cable connection and insulating protective cover And sales.Products comply with EU environmental protection, UL flame retardant, ISO9001 management system certification requirements.