Common faults and solutions of copper row processing machines
53
Copper row processing machine is mainly suitable for high and low voltage switchgear, transformer manufacturing industry, used to process various specifications of copper and aluminum busbars.As long as the corresponding processing unit can be punched, cut, and folded separately, the production efficiency is high.Then use can not avoid the occurrence of faults, how to solve it?The following editor of the copper row manufacturer summarizes the common faults and solutions of the copper row processing machine. 1. Since most of the transmission chains of copper row processing machines use rolling friction pairs, most of the failures in this area are caused by the decline in sports quality.For example, the backlash increases, the positioning accuracy cannot meet the requirements, the phenomenon of mechanical crawling, the bearing noise becomes larger (especially after a mechanical hard collision), etc.This part of the maintenance is often closely related to the adjustment of the preload of the sports pair, the loose ring and the compensation link. 2. This part of the fault is mostly related to the automatic tensioning device of the tool holder, the automatic shifting device and the decrease in the accuracy of the spindle movement, etc.Because the bus processing machine adopts electrical automatic speed regulation, the mechanical gearbox device has been cancelled. Sometimes although there is a gearbox, it is also very simple, and the structure is simplified to greatly reduce failures. 3. The copper bar processing machine is equipped with many limit motion limit switches. After a period of use, the movement characteristics of the moving parts have changed, and the mechanical reliability of the press-fit limit switch and the quality and characteristics of the limit switch itself will affect the whole Machine movement.This requires good inspection, replacement or adjustment. Yueqing Renhe Electronics Co., Ltd. is a professional copper bar manufacturer in Zhejiang, focusing on the production, research and development of new energy electric vehicle battery copper bar connection, electrical connection copper bar, braided copper bar, flexible copper bar connection, cable connection and insulating protective cover And sales.Products comply with EU environmental protection, UL flame retardant, ISO9001 management system certification requirements.