Common fault solutions of radiator air -deficiency

Electronic radiator 1. Heating heating is not hot
If there is a failure, the valve is generally closed
2. Heat is hot and hot, heating is there. Essence Essence
The reason for this reason is not cleaned, the air valve is required, the air is directly placed, and the gas is Axial Fan Filters placed directly.
At the end, there is an end -end of the airworthiness valve with a screwdriver, which is cleaned against the time, and it is just a while. To let go. Essence The heating valve in the bathroom is in. Essence
Reminder: After operation, the failure is still notified when the failure is still available. Essence
3. One mile, some of the heating heat
There are various types, which are mainly aversion to Tamper-proof Thermostat uniform and uniform, that is, allocated, needed, uniformly distributed, uniform and evenly, uniform and evenly.
4. The home is very hot, but the temperature is low and low
When there are species, you choose the radiator. You need to be too small, so when you buy the purchase of the radiator radiator, you must actually measure it.
5. Common: Heating temperature is enough, low room temperature: Returning to water: water inlet, water, increase low, increase low temperature
6. Common: enter the back (near heating): leak water. : Close and close the water valve. repair. Essence Essence Essence
7. Common: Method of leakage and leakage method outside (near the road): notify the property semi -closed valve; Essence Essence Essence Essence Essence