Functions, and Different Methods used to stamp parts.
Can Contain Cutting and Forming SectionS Made from Carbide or Various Other Hard, Wear-Resistant Materials.
Perform.
10 Percent of the Metal’s Thickness.
Band, or shear, and a portion call the frame zone, or break line (See Figure 2).
There are many different cutting operations, each with a spiecial purpose. Some Common Operations are:
Removed from the sheet by this proces is called the black, or starting piece of sheet metal that will be cut or formed Later (See Figure 5).
And in piercing the slug is discarded as scrap. The cutting punch that problem they are calld the pingch, and the house the point is calld the matrix (See Figure 6) (See Figure 6)
)..
Shearing -shearing sliceS or Cuts the Metal Along a Straight Line. This Method Commly Is used to Produce Raterr and Square Blanks (See Figure 8).