To make the uSEFUL. Moreover, simistic technology technology, virtually zero feedback on the question of the configuration data recurrent with the moLEDRDRDRDORDRDRDRDRDORDRDRDORDRDRDRDORDOARDORDORDORDORDRDORDORDORDORDORDORDORDORD.
FIRST, SIMULEION and Injection Machine Controller’s NEED to Learn How TOLK TO EACH OTHER in the Same Language.
Technicians and Production Technicians Can Use Each Other & RSquo; S Knowledge and Results and Learn from One Another.
Of Machine Limits. Modification Makes It Possible to Gauge WHETHER A PRODUCT CAN Actually Be ManuoFactured on the Selected Molding Machine.
have ben tested in simulation.
An Injection Machine DataBase Ensures that Simulation is Performed with Accurate Modeling of Actual Machine Capabilities.
Expertise.
whereby the user has full transparence regarding data traffic at all times.
Back-Forth Sharing of Preliminary Settings Determined Via Simulation and Reald Molding PROCESS Results Refine Both the Simulation and Optimal Machine Setup.
, Figs as-faired pp on a famary mic itly interior trim, map
, A Map Pocket and a Stiffening Element, all to be propuced from polyPropylene with 7% Mineral Filler (fig. 2).
Varying Sizes, The Biggest Challenge was to coordinal the cabding of the hot-ranner nozzles to the flow-front positive.
in the size.
Point in the cavity is independent of the Melt Compression in the System.
Machine-independenT SIMULATION, Even A Complex System Can Be Optimized Very Quickly and With Few Iterations in The Simulation.
Parts of the requisite quality.
To be open meet at the gate in order to avoid Weld Lines. The depict shows a very high level of Concordance BETWEEN the Initial Simulating data and the actual shopping should.
Actual Profiles, Including OsCillation of the Inject Pressure During Switchover Untilla the Required Holding Pressure Is Reached.
D3; in this case, D3 = 0. Better Congeence Between The Measured and the Simulated Pressure Curves Was Quickly Achieved by Empirically Adjusting This Parameter.
Can be made for subsequent projects.
AIM is to predict Cavity-Pressure Development as account
About the author
.angerer@engine; engineglobal.com.
Inject Molded Parts Editor & RSquo; S Note