On the propile is the area of the deposit.
Experimental Cof Value, which can be applied for numerical simulation as an adDitional benefit of this study.
A more obvious raise of cof was observed with further increase of the clamping force.
Scratches on the Sample of Bare D2 with 61Aus Lubricant Are Illustrated in Figure 3.
Based upon the test of the tested strips. No galling was observed in the inserts.
COF Incream Metal Stamping Parts for Higher Forces.
Area on the Profile is the area of deposit.
That having dlc coating on d2 base and having it very well well,
The Highest Galling Threshold and the Lowest Cof Were Achieved for DLC Coating in Combination with DC2-90 Lubricant.