Sales and Marketing. Only Three People Run Production At Each Facility Per Shift, so preventing questions is a high priority, to say the least.
New Measuring Tool
Production. "
-Beam CT.
Can increase to sub-micron levels.
2d sections, and overlay scans and cad geometry.
The problem is areas are revealed gradually as eACHPRINT DIMENSION is checked in servers.
ENVELOPE for Cavitation, Runner Design, and Other Features that May Make for a More Difficult Processs to Engineer, But all increase output and efficience,
Faster, better, cheaper
Might Droop).
is eliminated.
Just as color maps can be generated for a "part-to-cad" comparison, CT Scanning is convenient for "Part-to-PART" comparisons.PPAP. This Speeds Up Revalidations As Well As Corrective ActionS and ROOT-CAUSE Analysis of PROBLEMS.
The Resolution of CT Scans is so fine, Trisch Says, that can see ejector-Pin Marks on the Part or Transfer to the Part Surface of Cutter Marks on the TOOL CAVITY. "
Pour in liquid Rubber and then Crack the Part Open. It can be hard to get the rubber.
Disappear, In Effect. In one case, this helped us undership of a warpage problem. "
View from a service bureau
That this was an up-annd-coming fire and he founded a service company devoted to the technology.
Then, then
He adds that inspecting Small Small Tooling Inserts with Undercuts, Such as for Gears and Splines, Can Be Difficult to AccomPlish by Methods Other than CT Scanning.
Lot less money. "
Can Identify Voids and PORES in Stress Areas of a Part, Which May Be Invisible to Other INSPECTION MOLDED CASE PARTS Techniques.