But first thing first.
Process, so they must be manuoFactured using an alternative method, such as caseing footowed by machining to the specify tolerance.
Volumes. For Low PART VOLUMES, It Sometimes Makes Sense to Produce The Parts USING LOWER-COST METHODS LKE PRAKE PENDINGING, WELDING, and Machine..
Number of Steps Needed to make the part, as well as design the measurement means of execution the process.
Design. Don’T assume the part can be made from the specified material. Just before it’s ben designed to be made from a certain metal does be made from that matelial.
Die Material.
Die Length.
PRESS TONNAGE.
Lubricant type and application.
Thickness and geometry of die sections and components.
Need for Secondary Operations, Such as annealing.
"Metal." For example, if you think low-cawn draw-Quality Steel and are trying to form aluminum, you will likely have proples. That does not have d. It is bad;
The metal is coated or prepainted. If it is a nonferrous metal, find out if it is full hard, or has.
Variety of different metals withteing the die.