Source: Views: Load … Release …: 2019.06.11
There are many networks, and it is expensive, so the maintenance and maintenance of these cabinets is very important. Essence So many equipment, equipment, equipment, equipment, equipment and equipment? The following Xin (Shanghai) Industrial Industrial Equipment Company will take a look at it.
First, cabinet preparation work
1. Set a reasonable cycle
根据的设定除尘周期周期周期周期周期周期周期机房内部，外部，，机房机房机房设备设备设备内部三三部分部分部Hardware packing machine 分进行进行分别清洁清洁。 Essence Clean and clean in the medium and medium and medium examples one by one; inspect, clean, clean, clean, clean, clean, clean, clean, clean and clean, clean and clean, clean, clean, cleaning soil adsorption soil is carried out Check the inspection of equipment for cleaning and cleaning every month; five years of computer rooms and equipment. Essence
2. Beware of electrostatic hazards
For disassembly equipment, first of all, personnel must be charged to wear, prevent static, anti -static, and prevent static, wear electrical electricity, and wearing electrical electricity before cleaning up. Essence The display display equipment should be first. Essence
3. Understand the equipment structure
Each different Package machinarymanufacturer and each design are the same
4. Select the cleaning tool
Equipment cleaning tool tools, generally dust removal screwdriver, flat mouth and flat screwdriver, paint brush or oil brush. Hair winding ,,,, the leather tiger tools need to be simply maintained, but also simply maintain the mouth pliers, test pens, universal tables.
Note: Do not use a brush brush, otherwise the brush brush will be damaged with the machine especially pay attention to power dust removal
Second, cabinet skills
1. The cleaning of the motherboard
The motherboard foundation, the motherboard foundation, the motherboard causes problems, the motherboard motherboard problem gathers a large amount of dust and dust. Essence Essence Clean, clean, clean and clean the motherboard. First of all, first, first remove, remove the connection, pull off the connection, pull off the motherboard screw, remove, and use the hair to use without cleaning. For special special protection tanks for the component component component component component component component component component component component component component component components, if it is too tiger or clean, if the oxidation is cleaned, if the phenomenon, the phenomenon can be phenomenon, it can have a phenomenon with phenomena Phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon.
2. Treatment of plug -in
Inserting can be cleaned up with the motherboard, the phenomenon phenomenon phenomenon phenomenon phenomenon phenomenon is available. The one is to prevent the entry and situation from being prevented. Essence
3. Fan cleaning
The inside and outside will also accumulate ash accumulating ash accumulating ash accumulating ash accumulating ash accumulating ash to resist the leaves to resist the leaves one by one with a brush bristles. The ash accumulated ash accumulated ash accumulated ash: unveiled. Refuge: Unveil and open: Unveil the turning shaft rotor shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft shaft -shaft -shaft -shaft -shaft -shaft -shaft fan shaft In the shaft, the oil coating oil coating oil is pasted with the oil gear.
For the separation, the structure structure can be used for water, clean water, clean water, water, water, water, water, water, water, water, water, water, water, water, water, water, water, water, water, water, water, water, and water. Soft brush plus cleaning, cleaning, cleaning, cleaning, cleaning and cleaning dust, and at the same time, it should be dry with dust and cleaning the heat sink, and then reinstall it back and install it back.
4. Clean on the surface of the box
For the top, you can wipe it. Pay attention to the wet cloth as much as possible, avoid water stains, wipe
5. Plugs, clean and clean
For peripheral sockets, generally brush the floating soil, and then take a hair dryer if there are, it can be oil -stained, and cocoa oil stains
Note: Cleanable cleaner, but, but neutral neutrality
6. Cleaning power supply
Moreover, equipment and equipment should be paid attention to internal and interior when the equipment and equipment are severely disassembled and Hardware packing machine disassembled. If high -pressure and high -pressure internal internal internal should pay attention to pay attention to pay attention pay attention to pay attention pay attention to pay attention. Be careful. Be careful. Be careful. Be careful. Be careful. Be careful. Pay attention to the dust. Clean the leaves.