Do not pull the wire when plugging in the power plug

The linkage console is primarily used to exchange 50Hz or 60Hz voltages to 380V and DC voltages to 220V control circuits, controlling motor start, speed, commutation, and braking in a crane transport machine and similar electrical control equipment.Today, let’s take a look at the common sense of the linkage console.
First we know the power switch of the linkage console, learn to turn off the total power supply in an emergency.Do not disassemble, install the power line, socket, plug, etc. of the linkage console.Anyone about electricity should be cautious, and the electrical appliance must first turn off the power.You don’t have in contact with your hands or conductive objects (such as metal products such as wire, nails, pins, etc.) to try the interior of the power outlet of the linkage console.No wet hand touch appliances without wetting the appliance without wet cloth.
After the linkage controller is used, the power plug should be unplugged; do not pull the wire when the power is plugged, to prevent damage to the insulating layer of the wire; the insulating skin of the electric wire is peeled off, and the new line should be replaced with the insulating tunnel.it is good.