Hangzhou Sunbeam DC Surge Protector Product Introduction 1. Introduction: GS-II-DC series T2 grade surge protector, voltage-limiting modular DC surge protector, also known as DC lightning protector, has 48V DC surge protector, 24V DC power supply lightning protection device, 12V DC power supply lightning protection device in various specifications.
DC surge protector, 2. Main features: ● Select internationally renowned zinc oxide varistor ● Modular design, easy to replace, pluggable replacement lightning protection module without power failure ● Built-in overheating, instantaneous overcurrent automatic circuit breaker ● Failure Automatic monitoring instructions, standard module installation ● Wrong connection prevention method ● 5-year quality assurance, free technical support 3. Technical parameters: Model GS-II-24 V DC Nominal current capacity 10 KA Current capacity 2 0 KA Continuous working voltage 36 V response time ≤25 nanoseconds protection level Up ≤600 V IV. Installation method: 1. Multi-strand copper wire with a power connection wire of no less than 4 mm 2 and a multi-strand copper wire with a ground connection wire of no less than 6 mm 2.The connecting wire should be as short, straight and thick as possible. 2. The front end of the lightning protection device should be connected in series with a suitable backup protector, fuse or circuit breaker. V. Installation precautions: 1. The power supply must be disconnected during installation, live operation is strictly prohibited, and the connecting wire must meet the requirements. 2. After installation, insert the lightning protection module in place and check whether it works normally. 3. When the module fault display window of the lightning protector indicates red (the remote signal terminal outputs an alarm signal), it means that the lightning protector has failed and should be replaced in time. 4. The lightning protection device does not need special maintenance, just check regularly whether its connection is loose and whether the status indicator is normal. 6. Remarks OEM is accepted, and can be customized according to customer requirements.
We focus on the production of Hangzhou Sunbeam DC surge protectors, and are committed to building Hangzhou Sunbeam Electronics Technology into a well-known company in the lightning protection equipment market..For more information about DC lightning protection devices, please check Hangzhou Guangbei Electronic Technology Co., Ltd. for more news, company website:
Leave a Reply