The human body has a powerful immune system, the self-repair mechanism is still usually to take care and conditioning, in order to make cold ice machines to maintain good performance, then the staff is more careful, then what is the machine, it is not only steel The combination is also a child that needs to be taken care. The life of the machine does not depend on the quality of the machine, the most critical is the maintenance of the next day.
Cleaning, fastening, lubrication, adjustment, anti-corrosion is a few critical to packaging machine-dimensional powder packaging machine maintenance, in the daily production process, machine main numerics should strictly follow the prescribed cycle according to the maintenance manual and maintenance procedures of machine packaging equipment Perform various maintenance work, reduce the velocity of parts wear, eliminate the hidden danger of failure, and extend the life of the packaging machine.
Maintenance is divided into: routine maintenance, regular maintenance (score: first-level maintenance, secondary maintenance, three-level maintenance), special maintenance (score: is a change season maintenance, detailing maintenance).
The particle discharge machine routine maintenance is cleaned, lubricated, fastened and tested as a center, and maintenance as required when the machine works and after work.
At first-level maintenance is based on routine maintenance, the main work content is lubricated, fastened and inspects relevant parts and its cleaning.
Secondary maintenance is to be inspected, adjusted to the focus, specifically check the engine, clutch, transmission, transmission member, steering, and brake members.
Three-level maintenance is mainly detected, adjustment, eliminating fault hazards and weighing packaging machine balanced wear levels, and diagnostic detection and status checking of parts and fault signs of fault signs, further completion Replacement, adjustment, adjustment, and troubleshooting.
The sealing machine is one of the indispensable devices that are indispensable after the latter packaging. There are many precautions when they use, especially when packaging and fragile, more attention.
1. Can isolate 6 faces in the box with cardboard, which makes it possible to ensure that the sack packaging machine is put in, and the outer sealing can be sealed with a tape, and then the cross-crossing method is used. tension.
2, select the filler, the filler is generally a plastic foam or an air cushion, the advantage of these fillers is light weight, the buffer is good, and it can play a good protection for the goods. If the automatic sealing machine sealing comparison If you are in place, then the damage rate is small, while other fillers, such as newspapers, what is large enough, but does not have any buffer protection, the product is easy to break.
3, first seal the goods with a sealing machine, then put a relatively thick box outside, the size of the outer box is larger than the box inside, what is much more, generally, The width, the height is 6 cm. This can put some fill items in the middle. If the outer pack box is too large, you can also adjust it.
Shanghai Bofi Packaging Machinery Co., Ltd. is a high-tech technology enterprise integrating R & D, production, sales and services. The products are: particle packaging machine, powder packaging machine, weighing packaging machine, sack packaging machine, packaging scale, widely used Pesticide, feed, chemical and other industries, the company has become Shanghai professional powder packaging machine manufacturers, particle packaging machine manufacturers, telephone: 400-6181577HTTP: //www.bohui666.com/.