MAX14514 The most flexible dual-channel EL driver in the industry.

  

  The MAX14514 is a high-voltage DC-AC converter ideal for driving two electroluminescent (EL) lamps. The MAX14514 features a +2.7V to +5.5V input range that allows the device to accept a wide variety of voltage sources, including single-cell lithium-ion (Li+) batteries. The lamp outputs of the device generate up to 300VP-P for maximum lamp brightness.

  MAX14514 pdf:http://www.elecfans.com/soft/39/2010/2010042573975.html

  The MAX14514 uTIlizes an inductor-based boost converter to generate the high voltage necessary to drive EL lamps and allows the use of a 220μH inductor to effecTIvely drive total combined lamp sizes of up to 20nF.

  The MAX14514 uses a high-voltage full-bridge output stage to convert the high voltage generated by the boost converter to an AC waveform suitable for d riving the EL panels. An external resistor controls the slew-rate of the rising and falling edges of the AC drive waveform to reduce audible noise outp ut. The high-voltage outputs are ESD protected up to ±15kV Human Body Model, ±4kV IEC61000-4-2 Air Gap Discharge, and ±4kV IEC61000-4-2 Contact Discharge.

  The MAX14514 features dimming/enable controls (DIM1, DIM2) for each output to allow the user to set the peak-to-peak output voltage with a PWM signal, a DC analog voltage, or a resistor connected from DIM_ to GND. The MAX14514 also provides a slow turn-on/-off feature that slowly ramps the output voltage applied to the lamp when enabled or disabled.

  The MAX14514 enters a low-power shutdown mode when the EN and DIM_ inputs are connected to GND. The device also features thermal shutdown if the die temperature exceeds 158°C (typ).

  The MAX14514 is available in a space-saving, 14-pin, 3mm x 3mm TDFN package and is specified over the extended -40°C to +85°C operaTIng temperature ran

  Dual ±15kV ESD-Protected EL Lamp Outputs

  300VP-P Maximum Output for Highest Brightness

  +2.7V to +5.5V Input Voltage Range

  Resistor Adjustable Slew-Rate Control

  Resistor Adjustable Lamp and Switching Converter Frequencies

  DIM Input for Controlling Output Voltage Through DC Analog Voltage, PWM, or Resistor to GND

  Capacitor Adjustable Soft Turn-On/Off

  Low 150nA Shutdown Current

  Thermal Shutdown

  Space-Saving, 14-Pin, 3mm x 3mm TDFN Package

  Application/use

  Car dashboard

  Keyboard backlight

  LCD backlight

  PDA/ smart phone


Posted

in

by

Tags: